CyberPower - LX1500GU3 UPS Mount With Drill Guides and Leveling Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very robust mount for your CyberPower LX UPS. READ DESCRIPTION BEFORE PRINTING! :)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in the orientation in which it shows up in your slicer. This will make it so no supports are needed and will also be the strongest print due to the layer lines being perpendicular to the weight of the object you are placing on it. Some slicers will orientate differently than Bambu, so I included a photo as an example of the orientation for the parts. Some parts are hanging off the build plate, but this is for orientation reference only, not placement.

TOP & BOTTOM MOUNT OPTIONS. The UPS is very secure with only the bottom mounts, but wanted to include top mount options in case anyone wanted them.
1. Permanent Top mount
2. A Slide Top Mount that can slide in or out of it's own mount to make removing the UPS easier, for example, to clean it. THIS HASN'T BEEN TESTED, so if you use it, and it works, please let me know :)
3. Two Bottom Mounts: One with holes for a screwdriver, and one without the holes, ( cleaner look but harder to install ).
GUIDES: ( I recommend to use double sided tape/VHB or something to hold them in place. It’s difficult to hold all three while drilling. Also, just start the holes, then remove the guides to drill to your desired depth, less likely for them to move if barely drill a mark )
I included a few drill guides with the models for a 1/8" drill bit pilot hole. Since this a disposable part, I added a few holes/pockets and a honeycomb to save space. The drills guide are the same height and width of the model so you can make sure that where you drill, the mount won't interfere with anything after you attach it.
The leveling guide can be attached to the top two holes for both drill guides, or just one if you don't want to print two drill guides. Then a level can be placed across it to ensure all is level before you drill the pilot holes.
If you look close, you can also see the "tear drop" hole for the head of the bolt. This helps with printing and it not sagging as much, ( probably a little overkill for a hole this small, but hey, why not, lol ). I also made sure to a gap for the back of the UPS so the back vents are not blocked, rather than the UPS being completely flat against the surface in which it's mounted
I printed this in PETG at 45% infill. PETG is what I had on hand other than PLA. PLA might be strong enough, ( that is just me assuming ), but I was paranoid, so I used PETG for more strength. A top mount is included as well if you want more piece of mind.
These are the screws I used, ( mine are stainless steel, these are yellow zinc coated, I couldn't find a link to the stainless steel ones for some reason, but the sizes should be the same ). I included a few photos for size references if you can't find these and need to match their dimensions:
https://www.menards.com/main/hardware/fasteners-connectors/screws/wood-screws/grip-fast-reg-premium-9-x-2-star-drive-steel-flat-head-interior-construction-screw-1-lb-box/gfp2yz1/p-1642874262698632-c-8940.htm
![]() | ![]() | ![]() |
|---|


