Skadis T-Nut Ikea Tertial Lamp Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds an Ikea Tertial lamp to a Skadis board using T-nuts, with adjustable friction clamp.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 1
- Views
- 163
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This uses 3 t-nuts to hold an Ikea Tertial to a Skadis board.
The axis of the holder is angled so the lamp arm doesn't interfere with things on the Skadis mounted above, but this causes the arm to rotate under gravity. An additional M3 screw can be used to clamp down on the lamp base to add friction to prevent this.
Prints in provided orientation without support, install upside down as shown on photo.
Designed for M3 screw, with 6.5mm counterbore for screw head. I used these M3 printed thread T-Nuts: Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws By ORM
You should also be able use the M2/M2.5 T-Nuts from here: Skadis T-Nuts Mounting System for Ikea Skadis Pegboards by 6d6178
You might want to use a suitable washer in that case.