1 / 1
Skadis T-Nut Ikea Tertial Lamp Holder — zdjęcie 1

Skadis T-Nut Ikea Tertial Lamp Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds an Ikea Tertial lamp to a Skadis board using T-nuts, with adjustable friction clamp.

Ocena
5 / 5
Polubienia
5
Pobrania
20
Wydruki
1
Wyświetlenia
163
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

This uses 3 t-nuts to hold an Ikea Tertial to a Skadis board.

The axis of the holder is angled so the lamp arm doesn't interfere with things on the Skadis mounted above, but this causes the arm to rotate under gravity. An additional M3 screw can be used to clamp down on the lamp base to add friction to prevent this. 

Prints in provided orientation without support, install upside down as shown on photo. 

Designed for M3 screw, with 6.5mm counterbore for screw head. I used these M3 printed thread T-Nuts: Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws By ORM

You should also be able use the M2/M2.5 T-Nuts from here: Skadis T-Nuts Mounting System for Ikea Skadis Pegboards by 6d6178

You might want to use a suitable washer in that case. 

Tagi