1 / 3
Zuru Xshot Last Stand (Skins) Pump Action Handle — image 1
1 / 3

Zuru Xshot Last Stand (Skins) Pump Action Handle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modification for the Zuru Xshot Last Stand blaster that replaces the vertical pump handle with a shotgun style one.

Rating
0 / 5
Likes
6
Downloads
27
Makes
0
Views
112
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a horizontal, shotgun-style pump action grip for the Zuru Xshot Last Stand ("SKINS") blasters!

If you're like me, you picked up a two pack from Costco and then promptly broke the vertical grip pump handles.  This model provides a horizontal, more shotgun-like experience for pumping the blaster and is far more durable, with less lateral stresses, than the original handle.

Print both the handle, as well as the two bolt spacers.  The spacers will require a bit of post processing (sanding!) to make them fit without too much friction in the through-holes of the blaster.

Recommended Materials

  • 2 M3 x 40mm bolts

  • 2 M3 nuts

  • 2 M3 washers

  • Sand paper (for sanding down the bolt spacers)

Printing Recommendations

Although this would probably be fine printing in PLA, I've printed mine in PETG using a 0.4mm nozzle at 0.2mm layer height, with 10% infill (adaptive cubic) and 4 walls/perimeters.  My printer (Ender 3 V3 SE) didn't need supports to print this, but your mileage may vary.

Tags