Zuru Xshot Last Stand (Skins) Pump Action Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification for the Zuru Xshot Last Stand blaster that replaces the vertical pump handle with a shotgun style one.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a horizontal, shotgun-style pump action grip for the Zuru Xshot Last Stand ("SKINS") blasters!
If you're like me, you picked up a two pack from Costco and then promptly broke the vertical grip pump handles. This model provides a horizontal, more shotgun-like experience for pumping the blaster and is far more durable, with less lateral stresses, than the original handle.
Print both the handle, as well as the two bolt spacers. The spacers will require a bit of post processing (sanding!) to make them fit without too much friction in the through-holes of the blaster.
Recommended Materials
2 M3 x 40mm bolts
2 M3 nuts
2 M3 washers
Sand paper (for sanding down the bolt spacers)
Printing Recommendations
Although this would probably be fine printing in PLA, I've printed mine in PETG using a 0.4mm nozzle at 0.2mm layer height, with 10% infill (adaptive cubic) and 4 walls/perimeters. My printer (Ender 3 V3 SE) didn't need supports to print this, but your mileage may vary.