1 / 5
BRIO Railway Crossing replacement barrier and ramp — image 1
1 / 5

BRIO Railway Crossing replacement barrier and ramp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Basic model to replace missing parts from a wooden BRIO Railway Level crossing.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Basic replacement models for missing parts from the BRIO Railway Crossing set.

I have never seen the original parts, so these models were designed as robust functional replacements rather than exact replicas.

Barrier Gate

  • Best printed on its narrow edge, with supports applied to the hinge end

  • “Paint-on supports” work well when applied to one end only

  • Designed as a tight press-fit into the original BRIO crossing

  • Strong enough to be pushed in without breaking

  • If the fit is too tight, lightly sanding the pins should help

With the original BRIO part I had, the engagement was not very positive. I tried several size variations but couldn’t achieve a firm locking action. This version seems to work acceptably despite that limitation.

Ramp

  • I don’t believe BRIO made an equivalent full-width ramp

  • This model is designed to utilise the full width of the crossing

  • Optional colour change at Z = 12.40–12.45 mm to highlight the stop line

Print Settings

  • Material: PLA

  • Barrier gate: 0.2 mm layer height (Balanced profile)

  • Ramp: 0.25 mm layer height

Disclaimer & Compatibility

This model is not an official BRIO product and is not affiliated with or endorsed by BRIO AB.
Designed to be compatible with BRIO wooden railway systems for personal use and repair purposes.

Fit may vary depending on production tolerances and printer calibration. Minor sanding or adjustment may be required for best results.

Tags