BRIO Railway Crossing replacement barrier and ramp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic model to replace missing parts from a wooden BRIO Railway Level crossing.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
Basic replacement models for missing parts from the BRIO Railway Crossing set.
I have never seen the original parts, so these models were designed as robust functional replacements rather than exact replicas.
Barrier Gate
Best printed on its narrow edge, with supports applied to the hinge end
“Paint-on supports” work well when applied to one end only
Designed as a tight press-fit into the original BRIO crossing
Strong enough to be pushed in without breaking
If the fit is too tight, lightly sanding the pins should help
With the original BRIO part I had, the engagement was not very positive. I tried several size variations but couldn’t achieve a firm locking action. This version seems to work acceptably despite that limitation.
Ramp
I don’t believe BRIO made an equivalent full-width ramp
This model is designed to utilise the full width of the crossing
Optional colour change at Z = 12.40–12.45 mm to highlight the stop line
Print Settings
Material: PLA
Barrier gate: 0.2 mm layer height (Balanced profile)
Ramp: 0.25 mm layer height
Disclaimer & Compatibility
This model is not an official BRIO product and is not affiliated with or endorsed by BRIO AB.
Designed to be compatible with BRIO wooden railway systems for personal use and repair purposes.
Fit may vary depending on production tolerances and printer calibration. Minor sanding or adjustment may be required for best results.