Dandadan/Momo and Ken - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remake of Momo and Ken from Dandadan using HueForge.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#245a43 PLA Chrominal Green Serpent Transmission Distance: 6.9
#151c18 PLA Elegoo Black (MATTE) Transmission Distance: 0.1
#114b62 PLA Chrominal Blue Deep Sea Transmission Distance: 5
#b10000 PLA Prusament Red Lipstick Transmission Distance: 3.5
#f7d7b7 PLA Elegoo Beige (MATTE) Transmission Distance: 2.1
#ef90bb PLA Sunlu Pink Transmission Distance: 4.5
#ffffff PLA eSun White Cold Transmission Distance: 1.6
This print uses 7 unique filaments
Swap Instructions:
Start with Green Serpent
At layer #6 (0.56mm) swap to Black (MATTE)
At layer #8 (0.72mm) swap to Blue Deep Sea
At layer #11 (0.96mm) swap to Red Lipstick
At layer #18 (1.52mm) swap to Beige (MATTE)
At layer #22 (1.84mm) swap to Pink
At layer #23 (1.92mm) swap to White Cold for the rest.