Counting matching models…
Scalable mask of the main bone daddy, Lord Ainz! For overlord fans and as a Halloween mask. I went with strong supports so it popped off in one piece \/ I did not add holes. That can be done in slicer. If you need them let me know.…
Hello, I made Momo and Appa keychains I've made them using lithophane sight named 3DP rocks then I cut the model placed the background, and printed it. In order to print it in two colors you can have either a multicolor printer or a…
A 3D model of momo's earrings. The measures are 2cm whide and 3,5 cm long
Figura de colección de Momo del anime Dandadan
si te gusto el modelo sígueme en mis redes sociales donde empezare hacer videos mostrando como hago los modelos https://www.instagram.com/erm.3d.creations?igsh=aGI1dGIyenZ1OTJr me ayudaría mucho tu apoyo
Zabuza Momochi's Executioner's Blade from NARUTO one of the Seven Ninja Swordsmen of the Mist swords. I couldn't find a STL I liked so I made one, it isn't screen accurate but I tried my best. it is very large Hilt to tip is 66"
My original horn button was the “slip in” button, which didnt hold very well and would fall out often. It also didnt look very nice. This is a replacement which uses the 6 bolt holes from a 6 bolt steering wheel to hold it in. You will…
Manual Gear Shift Fidget - Desktop Stand & Momo-Style Knob This is a new base and knob set for the Manual Gear Shift Fidget model, designed to take your fidgeting to the next level. It features a new clamp-on base for your desk and a…
It is recommended to use smoothing for a better finish.
Simple adapter to fit a Nardi wheel onto a Simucube/OSW/etc standard 70mm PCD base. Requires 6xM5 heated inserts to be fitted into the Nardi (non-recessed) holes. I used these heated inserts, M5x6x7OD size, but have also included the STEP…
Use the Gcode or import both White and black, then merge, slice and pause at 1,00 or 1,20. Start the print with white color, when the printer pauses change the filament to Black and finish I have a lot of this anime models but usually I…
I didn't like the look of the rubber cover that came with the MOMO hub, so I designed a smooth version. Printed with a 0.2mm layer height, I modelledthe bottom of the part 0,2mm thick to have good bed adhesion. This part needs to get cut…
Cookie cutter with marker imitating the Funko characters I designed for a client. If you need any cutter send me a message. Infill 15% 0.2 Layer height
Momo quick release spacer Can be used on any 6-bolt mount using 70mm spacing There are 4 types: 5, 10, 15, and 20mm. When printing, the strength of the infill does not increase as much as expected. Increase the number of out walls The…
PETG Schichtdicke 0,32 Infill 20% Stützen Überall und bei Stil: Nahtlos PETG Layer thickness 0,32 infill 20% Support everywhere and in style: seamless
This is a paddle shift for AliExpress 320mm wheel button box. Better assembly and maintenance, Momo quick release compatibility Use m3 heatset insert instead of m3 nut (need 20 heat set inserts in total) Problems such as missing magnets…
Since this design is based on N1bbles awesome Quick Release ( https://www.thingiverse.com/thing:3317013 ) a lot of the info there applies to this one here as well. So I'm just gonna copy/paste the most important bits. printed out of PLA…
This 3D model set includes two cosplay accessories inspired by Momo Ayase from the anime Dandadan : A round medallion pendant designed to be worn on a choker or ribbon. A pair of alien-shaped earrings , replicating Momo’s signature look.…
Logitech MOMO Racing shifter cap There is a small over hang in the clip area, support is needed there. I'v uploaded 2 versions: With premade support Without support I get better results with premade supports than with sclier's generated…
Momo steering wheel holder NRG Innovations SRK-400BK Black Quick Release Thin Version
For any member of Matara Kan's community wishing to show pride with something they have printed.
momo ayase kidnapped by aliens. Powered by MakerWorld-Make My Lithophane (https://makerworld.com/makerlab/makeMyLithophane)
DUAL COLOR WITH PAUSE Slice and set a pause in the slicer (at 0.20 it will be layer 6 or 7) Start the print in white, when the printer stops change the filament to black
For those Momo that need a bookmark for Matara Kan's book club reading. Sized to around 4.5"x1.5"
I recently received a request for a Momo Yaoyorozu - Creati cookie cutter. The anime series Boku No Hero Academia is still going strong and the new season starts in just 8-days. Here is my take on Momo, I hope you like her. As always I am…
A new 3D figurine generated by AI, a Chibi Momo (Avatar). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the…
Used with Peak Design mobile cases. You can remix it or attach a finger holder. Use 10mm (diameter) round magnets up to 3mm high. Place it on a slight angle and the middle piece will rotate when magnetically attached to the case,…
Button box for Sim racing wheel build, this button box utilizes a budget phone as LCD The shifters for this wheel can be found here: https://www.thingiverse.com/thing:4734346 Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA…
I created this model because I needed a cover for Hinamori's katana for cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar…
Powered by MakerWorld-Image to Keychain
A model for your cat food dispenser, with 2 parts for 2 cats. The paw was painted. Thank you for your feedback
My original metal caps where damaged so i made these replacements for original ABS cap, AI was used only for converting png logo into stl for modeling
Project: Momo_01.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 155.5x220mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Project: Momo.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm…
It's the monkey companion of avatar aang!
Featuring her signature high ponytail, composed expression, and detailed hero costume, this sculpt captures Momo’s recognisable style. The sweeping hair and raised collar create a striking silhouette, while the round pedestal base…
The Design Just another fidget toy, named Momo, which is named after our new house mate. Material I used PLA Print settings I applied the following settings: Layer height: 0.20 Infill : 15% Model orientation: <see main picture>…
Specifically designed for 5.5oz bottles of Momofuku chili crunch. Will work with anything 65mm diameter or less. I printed in TPU 95A. 0.2mm layers and 15% gyroid infill. If you print in more rigid materials you may need to adjust size…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
I created this model because I needed a cover for Hinamori's katana for cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar…
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the…
Hubcap for momo wheel 53.5mm Print at 45 degree and use ams if u want dual color
Project: Momo Ayase Ball Suck Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.1x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and…
Project: Momo Whore Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.52x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
discord.gg/6sMtrX6DKz tiktok.com/@ermvideos instagram.com/erm.3d.creations https://www.youtube.com/@ERM-studio
WA HA HA HA IT'S A FESTIVAL! Cosplay armor of Don Momotaro from Avataro Sentai Donbrothers. Personal Cosplay Use Only, Do not sell 3D Prints. If you want a to sell 3D printed copies please contact me at TheNextDecade.co Enjoy!
When using a Kyostar steering wheel short hub adapter with a 1989 Nissan 300ZX (Z31) to install a MOMO MOD.07 HERITAGE steering wheel, the steering column and steering column nut extend beyond the steering wheel's face, making it…
Wall mount for 6x 70mm steering wheels. Use a drill to make 3/16" holes in the mounting plate, or use a M5x0.8 tap/ brass heat-set threaded insert to mount the wheel. The holes are sized ready to accept a tap. This design is locking and…
Hubcap for momo wheel 53.5mm Print at 45 degree and use ams if u want dual color
This adapter ring allows you to mount the original logo plate from a Momo horn button into a momo steering wheel with a 55.25mm center hole. It is specifically designed for the Fanatec ClubSport Universal Hub to provide a flush,…
Project: Momo Ayase.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Print in high resolution, 0.08 Start the print in white and insert a pause in last few layer. When the printer stops switch to black
Lid for trash can sold by Oomomo. This fits the trash can with dimensions 180mm x 108mm. You'll need to print the lid cap separately and (super) glue it on. For the lid itself, I dont recommend supports
It's a blade for dummy13，inspired by Nuruto Approximately 7" in length
all parts printed with 70% infill in PLA except paddle shifters they are 90% infill Category: Video Games
There are some plate supposed to hold the horn that I don't own and I created this to replace them. Basically you need to use two screw to bolt this little ring on the nrg hub, then mount the steering wheel, then mount the horn with the…
