DanDaDan_Momo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'm learning to make animation models and posters, please let me know if you have any suggestions!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Project: Momo_01.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 155.5x220mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mm
Filaments Used:
#000000 PLA 3DHoJor Black Transmission Distance: 0.1
#cd382e PLA Kingroon Red Transmission Distance: 4.2
#7900b6 PLA ELEGOO Purple Transmission Distance: 3.2
#ffff00 PLA Sunlu Yellow Transmission Distance: 6
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2.4
#ffffff PLA Sunlu White Transmission Distance: 6.2
This print uses 6 unique filaments, other brands of filament with same color and similar TD should work as well.
Swap Instructions for one AMS:
Slot1: Black
Slot2: Red
Slot3: Purple
Slot4: Yellow
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Red (Slot2)
At layer #11 (0.96mm) swap to Black (Slot1)
At layer #12 (1.04mm) swap to Purple (Slot3)
At layer #14 (1.2mm) swap to Yellow (Slot4)
Pause at Layer #15 to allow color swap:
Slot3: Purple --> Cyan
At layer #20 (1.68mm) swap to Cyan (Slot3)
At layer #23 (1.92mm) swap to Yellow (Slot4)
Pause at Layer #24 to allow color swap:
Slot3: Cyan --> White
At layer #25 (2.08mm) swap to Black (Slot1)
At layer #26 (2.16mm) swap to Red (Slot2)
At layer #28 (2.32mm) swap to White (Slot3) for the rest.