Steering Wheel Wall Mount (70mm Momo bolt pattern)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple wall mount adapter to mount aftermarket steering wheel to the wall with a simple quick release.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Wall mount for 6x 70mm steering wheels. Use a drill to make 3/16" holes in the mounting plate, or use a M5x0.8 tap/ brass heat-set threaded insert to mount the wheel. The holes are sized ready to accept a tap.
This design is locking and has a locating tab on top of the wall mount to help align the wheel to the wall mount when attaching and removing. Align then locating tab and twist the wheel into its upright orientation.
I'd print with more perimeters if you plan on using a smaller nozzle. I printed with a 0.8mm nozzle using 3 perimeters. Turn support on to support the locking mechanism while printing.
Not that anyone would try it, but this is not a substitute for a working automotive quick release whether its for real or simulated driving. This was only designed to be used to mount a steering wheel on a wall.
Hardware required:
Steering Wheel
6x M5x0.8 16mm screws
3x countersunk #8 drywall screws (and probably drywall anchors)