320mm Wheel Momo Quick Release Competible Paddle Shift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a paddle shift for AliExpress 320mm wheel button box. Better assembly and maintenance, Momo quick release compat
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 779
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a paddle shift for AliExpress 320mm wheel button box.
Better assembly and maintenance, Momo quick release compatibility
Use m3 heatset insert instead of m3 nut (need 20 heat set inserts in total)
Problems such as missing magnets have been completely resolved and the size has been increased to 10mm.
FHCS stl uses only FHCS bolt for better cosmetics
Not required. I use regular stl
The hinge has been modified to reduce scratching noise from the wall.
It's mounted like this, so you can release it
If necessary, use spacers together.
https://www.printables.com/model/897011-momo-quick-release-spacer
BOM:
2x switch
4x 10x3mm Magnet
20x M3 Heatset Insert Nut (This is a standard M3 insert nut of M3xD5xL4)
2x 30mm Bolt (Hinge Axle)
2x M3 Lock Nut (Hinge Nut) - Normal nuts are also available when using a threadlocker
Don't tighten it too hard
6x 26~30mm Bolt (Fixing the housing)
2x 16~20mm FHCS Bolt (Fixing the housing)
8x 14~16mm Bolt (Fixing the buttonbox)
4x 8~10mm Bolt (Fixing the paddle)
The explanation may be strange due to the use of a translator.🥲