RAM mount from old broken photo claw
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.70 – €0.86 net (excluding VAT)
For file: adapter_barre_ram_0.2mm_PETG_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.78 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 53.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I had a broken mount, with a thread (cheap from aliexpress), repaired it by adapting a RAM head
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Print with supports, the ball facing down.
I've printed out of cheap PETG and used a 3x25 screw in the middle, seems to be holding fine.
Use at your own risk, I have no idea how resilient to vibration or high speed it will be
Check pictures of original mount / parts to check if it fits.
Not sure if it will be of any use but sharing just in case :-)