1 / 1
Hueforge Stamp Colossus of Rhodes — image 1

Hueforge Stamp Colossus of Rhodes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A stamp-like hueforge.

Rating
0 / 5
Likes
9
Downloads
7
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Hello,

this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use any other black filament type, about the others i am not sure, but feel free to experiment. There is two .stl file, one with the stamp-like effect, and one without.

Printing:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 158.38x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Red

At layer #12 (1.04mm) swap to Scarlet Red

At layer #15 (1.28mm) swap to Jade White for the rest.

Hope you like it, leave a comment, and have a nice day!

Tags