1 / 9
Dewalt 600 or 611 Palm Router - Makita Track - Robust Model — image 1
1 / 9

Dewalt 600 or 611 Palm Router - Makita Track - Robust Model

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Robust, stable jig attaching Dewalt 600 or 611 palm router to Makita track rail, for straight routing.

Rating
0 / 5
Likes
15
Downloads
42
Makes
0
Views
254
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This robust jig attaches the corded (DWP611) or cordless (DCW600) Dewalt 1.25hp palm router to  Makita track rail. Features:

A. The router attaches to the jig using the original plate screws.

B. I drew the Makita track profile and then printed and adjusted it repeatedly for a snug fit that still slides smoothly, printed in PLA or PETG. I extended the plate for broad contact with the track rail.

C. A strong handle enables stable, secure, two-handed routing. To attach the handle to the plate, use two each of:

  1. M6*8*10*8  (or M6*8*8*8) heat-set threaded inserts (available here), melted into the form-fitting screw blocks on the plate, and
     

  2. M6*20mm hex socket head cap bolts (e.g., here), inserted down through the handle uprights.

Printing:  Bottom smoothness is key; rotate the plate to prevent supports on that surface -- see photo of sliced model. For strength, print the handle on its side or with the legs pointing up. There is 0.2 mm of clearance between the screw blocks and the matching handle recesses; file the blocks a little if the fit is too tight.

Model is downloadable as STL files or 3MF (generic or Bambu).

Also available on Makerworld.

Tags