1 / 9
Dewalt 600 or 611 Palm Router - Makita Track - Robust Model — zdjęcie 1
1 / 9

Dewalt 600 or 611 Palm Router - Makita Track - Robust Model

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Robust, stable jig attaching Dewalt 600 or 611 palm router to Makita track rail, for straight routing.

Ocena
0 / 5
Polubienia
15
Pobrania
42
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This robust jig attaches the corded (DWP611) or cordless (DCW600) Dewalt 1.25hp palm router to  Makita track rail. Features:

A. The router attaches to the jig using the original plate screws.

B. I drew the Makita track profile and then printed and adjusted it repeatedly for a snug fit that still slides smoothly, printed in PLA or PETG. I extended the plate for broad contact with the track rail.

C. A strong handle enables stable, secure, two-handed routing. To attach the handle to the plate, use two each of:

  1. M6*8*10*8  (or M6*8*8*8) heat-set threaded inserts (available here), melted into the form-fitting screw blocks on the plate, and
     

  2. M6*20mm hex socket head cap bolts (e.g., here), inserted down through the handle uprights.

Printing:  Bottom smoothness is key; rotate the plate to prevent supports on that surface -- see photo of sliced model. For strength, print the handle on its side or with the legs pointing up. There is 0.2 mm of clearance between the screw blocks and the matching handle recesses; file the blocks a little if the fit is too tight.

Model is downloadable as STL files or 3MF (generic or Bambu).

Also available on Makerworld.

Tagi