Snapmaker 2.0 removable holder for linear rails SBR16 for y-axis stabilization
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removable holder for SBR16 linear rails for y-axis stabilization of the workplate of the Snapmaker 2.0/A350/250
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Installed linear rails to get rid of flexing of the workplate of my Snapmaker 2.0. The rail holders screw into the base of the linear modules, allowing an installation without drilling the base.
This model is a re-design/remix to fit SBR16 linear rails with a different geometry. Check the geometry of your linear rails before printing!
The design is for this geometry of SBR16 linear rails:
I have used these linear rails from AliExpress: https://a.aliexpress.com/_EInidSy
The linear rails need to be a minimum of 700mm to fit the A350.
Materials:
I used 20 M4x16mm screws to fix the holders to the linear rails and to secure the rails. You can use shorter screws, I just used these because I already had them.
Print Settings that I used:
Material: PETG
Perimeters: 4
Solid Top & Bottom Layers: 5
Infill: 30%, Cubic
No Supports