1 / 1
2-Liter / Soda Bottle Cap to 1/4" Drip Irrigation Adapter — image 1

2-Liter / Soda Bottle Cap to 1/4" Drip Irrigation Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip…

Rating
5 / 5
Likes
73
Downloads
881
Makes
3
Views
3,236
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution

This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time.

IMPORTANT: Cut a small washer out of craft foam to help seal the bottle to this cap. Alternatively, you could use a small rope of modeling clay or polymer clay to seal things up.

You can not use a typical drip irrigation nozzle with this as it does not have enough pressure to overcome the nozzle's diaphragm. Either modify a drip nozzle, or drill small holes in the 1/4" drip tubing. I designed this to slowly water tomato plants that are inside of a grow chamber at a slow rate to prevent spillage.

Modify it here: https://www.tinkercad.com/things/bajGxFj09p7

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

Rafts:

No

Supports:

Yes

Resolution:

0.15mm

Infill:

100%

Filament: Prusament Pla Grey


Notes:

Print at 100% infill, 8-shells, 7 surfaces for best water tightness. Paint with 5-minute epoxy if a leak occurs.

Category: Outdoor & Garden

Tags