Sv08 5020 turbo enclosure filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4x more air, Upgraded fan and increased carbon capacity.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 1
- Views
- 207
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM: Print Cooling Fan for Sovol Zero, SV08, SV08 Max | Partsbuilt 3D https://share.google/vDjEstvNEWJu6xMZM (Important, this one specifically is a 0.5amp/12w fan. It's extremely high flow and why this blower works so well)
2x 25mm m3 screws
2x m3 nuts
4x 6x2 magnets
75 grams of pelletized carbon
JST 2.5 male 2 pin connector. (I salvaged one from a 5015 fan I was using)
Print in asa/abs/pc, 3 walls, 5 top/bottom, 10% infill, 7mm brim
Fan: Remove top cover and Clip the locking tabs off with flush cutters for installation.
install JST2.5 connector on the fan leads and assemble.