Hueforge Black and white: The Great Wave off Kanagawa
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A series of hueforges, inspired by the great ukiyo-e artist Katsushika Hokusai.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 41
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Hello everyone,
this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice.
Printing:
The Model is 149.99x105.79mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#808080 PLA BambuLab Grey Transmission Distance: 2
#ffffff PLA Alzament White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Grey
At layer #19 (1.6mm) swap to White for the rest.
Happy printing!
