1 / 8
Sino Heavy Forklift Toy Forks — image 1
1 / 8

Sino Heavy Forklift Toy Forks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement forks for the Sino Forklift toy, fits perfectly. Needs 2x M2x12 hex screws. 2 variants, original & LevelOff.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
74
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes:

  • 2 variants: Original & LevelOff (this variants has a added angle block at the hinge to keep the forks more level than the original set when carrying a load/pallet.

  • Slightly thicker fork tips for robustness.

  • 3 part assembly (needs 2x M2x12 hex screws). The rod is keyed to reduce rotation and the screws give the joining links more strength - very simple

I'd suggest the rod printed with 100% infill, with a brim and printed vertically, in PETG, and slow!
For the forks, PETG again, infill at least 30%, I'd even make them solid (infill 100%). If going non-100%, then add modifier cylinders around the screw holes and set those areas to 100% infill to give it extra strength.

Print the forks on their side, with the keyed hole for the rod facing upwards. Add a brim and I'd suggest adding a support enforcer just inside the hex head hole.

Enjoy.

Tags