Sino Heavy Forklift Toy Forks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement forks for the Sino Forklift toy, fits perfectly. Needs 2x M2x12 hex screws. 2 variants, original & LevelOff.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes:
2 variants: Original & LevelOff (this variants has a added angle block at the hinge to keep the forks more level than the original set when carrying a load/pallet.
Slightly thicker fork tips for robustness.
3 part assembly (needs 2x M2x12 hex screws). The rod is keyed to reduce rotation and the screws give the joining links more strength - very simple
I'd suggest the rod printed with 100% infill, with a brim and printed vertically, in PETG, and slow!
For the forks, PETG again, infill at least 30%, I'd even make them solid (infill 100%). If going non-100%, then add modifier cylinders around the screw holes and set those areas to 100% infill to give it extra strength.
Print the forks on their side, with the keyed hole for the rod facing upwards. Add a brim and I'd suggest adding a support enforcer just inside the hex head hole.
Enjoy.