Liczymy pasujące modele…
Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
This is a volume spacer system for RockShox Judy / 32mm Solo Air Forks that have a smooth, unthreaded top cap. I have used this on my 32mm RockShox Judy but it has not been tested on other models. If you find it works on another model,…
These forks are longer than the forks in the original force knight file. I found these to be a lot more effective than original ones. I would recommend using them against bots that have a wedge or any bot with low ground clearance. This…
printed in PETG 3 walls myself. clicks over and onto the existing loader front
Take suspension tuning to another level with half sized volume spacers. For best results, print it out of PETG or something that can flex a little bit. PLA may be a little too brittle. Print with 100% infill, clip on, have fun. If you are…
My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes: 2 variants: Original & LevelOff (this…
This is designed to hold a meditation tuning fork set with a shaft diameter of about 8 mm, with the hammer about 10 mm. A standard hockey puck fits in the center (an excellent strike face for the tuning force.) Mine is printed in…
"If you’re part of the knife world, you’ve probably seen "Zero Forks Given" knives, stickers, or patches from Blade HQ floating around. Maybe you’ve wondered: Why forks? Why now? ...A movement full of fork-hating satire that flies under…
About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…
Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Simple hand tools that are used to make cord from yarn. Vidličky na výrobu tkaniček a náramků - tradiční nástroj pro zábavné tvoření s dětmi
Aid tools for mechanical keyboard assembly. The forks are inserted between the plate and the circuit board and ease the building process by keeping the gap between these two components consistent. The switch pushers protect your…
Added mounting points ( 2 pcs 2.6x6mm screws required) to secure the forks to the bottom of the carriage. This is less "realistic", but saves you from having to adjust them when they get tilted during use. Removed vertical bar pattern…
Youtube demo link: https://youtu.be/phE24J7kQrQ?si=WOx-oIXxJhKfpGu_ Youtube build link: https://youtu.be/Xqmj-n5zHR4?si=U1yKhIICVGpWdTdb This is my radio controlled Guido the forklift from the movie Cars. It has working forks. It uses 3…
Bring style and organization to your table with the Bon Appétit cutlery holder! This refined and functional design is crafted to hold forks, knives, and spoons, keeping them tidy and ready for use. Perfect for restaurants, formal dinners,…
I recently designed this Crown Race Setting Tool for seating the Crown Race on my Fox 34 Suspension Fork by forcing it into place with a rubber mallet. The Tool provides a total operation height up to 190mm. Make sure to print it with the…
This model is compatible with the lego system.
It is a little hard to print, and may take a few tries. My printer is not the best though…
Diese Einschlaghilfe habe ich für die 41mm Federgabeln der Suzuki DR650 konstruiert. Sie kann natürlich auch für andere Hersteller und Modelle mit 41mm Gabelrohren verwendet werden. Ich empfehle es aus einem stabilen Material wie ABS/ASA…
Under Desk Drawer for spoons and forks. In my version, the drawers are deeper, longer and narrower.
Heel forks, or heel hooks for a circular knitting machine. These tools are used to add weight in specific places of the sock while knitting a heel, to keep the correct tension. The fork is a single piece that can be printed without…
The goal of this design was to make a 3-bolt water bottle/bikepacking cage mount that could be secured to the 43mm diameter lower tubes of my mountain bikes' suspension forks. I wanted it to be a very secure fit, strong, lightweight,…
Friction fit Apple AirTag holder for 32mm forks. THE FIT IS TIGHT, TAKES A LOT OF EFFORT TO PRESS THE AIRTAG BASE ONTO THE 3D PRINT, YOUR PRINTER -MUST- BE DIALED IN CORRECTLY. 100 Hours of riding and still holding strong. Can be easily…
Front Reflector for Speedforks Version 1 : Designed for a wire that exits through the center of the axle. Version 2 : Designed for a wire that exits to the side of the axle. The reflector component can be sourced from AliExpress by…
Fox mudguards mount to the arch and the lower leg bleed ports. Only the factory forks have these bleed ports but all forks have the fastener holes in the arch. I made these standoffs to zip tie to your lower leg with the mud guard to hold…
Motorcycle boots don't allow thestock shields to be fitted, and the rubber over aluminum seems like a too basic setup. This can be used not only with boots but also for normal fork bushings protection, especially the tall one, in case the…
Had custom stainless lines made for my vintage Kawasaki H1 500, along with different brakes that use a traditional banjo. Several ideas for keeping the line close, but this seemed fun to make. Updated this model. Marked it as V2, but it…
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
Name: Grady Connolly Part Name: Ring Basket Forks Revision: v1 Section: VEXU Purpose: Forks Proposed Material: Chris's PETG (currently in the AMS on the x1 carbon) Needed By: Jan. 29th - Week before Feb. 15th Vex comp. Comments: print 2…
Name: Nicolas Restivo Part Name: Side forks and small forks Section: Combat Purpose: Get underneath bots Proposed Material: UHMW Needed By: 2/25/25 Comments: Two of each minimum please
Part Name: Long Forks Revision: 2 Section: Combat Purpose: Fork Proposed material 1/2 inch UHMW Needed by: 11/1/24 Comments: Hello again
Name: Nicolas Restivo Part name: I'm Okay side forks Section: Combat Robotics antweight Purpose: Help create sandwich style forks for my 1lb. robot Proposed material: 1/8 inch UHMW CNC Needed by: 9/16/24 Comments: Forks thicker side…
This a speedo mount to fit on a an R6 Forks. I believe this would fit on a R1 and similar years too. The boss for the ignition key has been cut off to fit this. This fits a 85mm or 3 3/8" Gauge, the one I specifically have is a “Motor…
Use 4x M3 bolts. Duplicate and mirror the part in the slicer so the cable routing goes to the upside on both sides. Blinkerbase is 15mm, .f3d added if you need to adjust to fit your blinker.
This is a custom mount for the Knog Plus light , designed specifically for aerodynamic (aero) front forks . Inspired by the original Knog mount, this design allows you to attach your light to oval-shaped pipes. The oval sketch shape is…
Adaptor for Suntour forks to receive a touring mudguard. Printed in PETG with 30-50% infill.
Basic seal driver to press seals int mountain bike forks. There is a 32 millimetre, 35 millimetre and 38 millimetre. I can add more at request.
Hammer XT detachable Forks I designed this for my self but if someone is looking for something similar well here you go. this is made to work with the Hammer XT by simple shot. It is not a full sling shot Print Setting: 100% infill Print…
Overview I designed this small adapter to make the Granite Stash RT ( https://granite-design.com/en-de/products/stash-rt ) tool fit inside a straight 1-1/8" fork steerer . The original Stash RT is made for tapered steerers (1-1/8" to…
Threadless Saw Guide for Steerer Forks This 3D-printable tool is designed to assist in shortening bicycle steerer tubes—whether steel, aluminum, or carbon —inspired by professional cutting guides like the Park Tool SG-6. It provides an…
I made this for a RC motorcycle I am working on. You might need to cut/sand some parts if they do not fit.
These forks are longer than the forks in the original force knight file. I found these to be a lot more effective than original ones. I would recommend using them against bots that have a wedge or any bot with low ground clearance. This…
printed in PETG 3 walls myself. clicks over and onto the existing loader front
Take suspension tuning to another level with half sized volume spacers. For best results, print it out of PETG or something that can flex a little bit. PLA may be a little too brittle. Print with 100% infill, clip on, have fun. If you are…
My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes: 2 variants: Original & LevelOff (this…
This is designed to hold a meditation tuning fork set with a shaft diameter of about 8 mm, with the hammer about 10 mm. A standard hockey puck fits in the center (an excellent strike face for the tuning force.) Mine is printed in…
The Rokenbok Transgripper is one of the more unique vehicles in the line up due to its transverse clamping forks. On the earlier models these forks were permanently attached, and once broken you are out of luck. At some point the forks…
"If you’re part of the knife world, you’ve probably seen "Zero Forks Given" knives, stickers, or patches from Blade HQ floating around. Maybe you’ve wondered: Why forks? Why now? ...A movement full of fork-hating satire that flies under…
Carbon Steerer Tube Cutting Guide (28.6 mm) This simple 3D printable guide helps you cut 28.6 mm carbon steerer tubes straight and accurately. It aligns your saw blade and keeps the cut square, which is especially helpful when shortening…
Adjustable Pallet Forks Included are various fork lengths, and the step file is anyone would like to make there own length.
This model is compatible with the lego system.
This model is compatible with the lego system.
About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…
This is aluminium steerer insert for carbon forks. It can be used for repair of lightly damaged fork steerer or increasing safety on a new fork. Do not even think about using it printed, even from PEEK. You have to have it machined. I do…
For a training tool on how to carry a load on a forklift. Toyota forklift forks (forks attachment, not adjustable). I don't think anyone needs it for this training tool, but if you want a paper weight and work at a forklift dealer it…
flexible handle to suit various grip patterns, assistive or otherwise. added a flexure pocket to allow for metal spoons to be inserted.
I recommend printing on the side which faces the floor. These forks were designed to fit with the Plifter by Burnout but could be used for anything you need.
This number plate covers the control cables and wiring between triple clamps on a Trials bike. Dimensions are based on my 2000 Sherco 2.9, but it may fit others. Printed in PLA, the picture here shows it bare, right off the printer. I…
I'm printing these now, but they SHOULD be the right angles for the front forks. It is possible I have left and right mixed up. Category: Other
Bucket Hinged Forks for telescopic loaders compatible with Burder part 42145. Works for John Deere and Massy Furguson and probably more Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes…
Nastavitelné parametry umožnují přizpůsobení modelu.
This is a replacement for the Rokenbok forklifts - designed similar to the original but simplified and made easier to 3D print. The forks are basically identical, the mount is modified to have thicker parts and without the weird Rok clip…
Just a forks protector for my bike rockrider 540 with suntour sxr 120mm Category: Sport & Outdoors
suzuki sv650 front forks ring, thay are aesthetic and protect the front of the forks I recommande to made them with PETG filament Category: Automotive
As we are heading for a one week bike trip, we wanted to have a place to pack our bulky but lightweight stuff like sleeping bags and inflatable mats. This leafs much more space in our bike trailer for other stuff, which is nice. :) I got…
I didn’t want to smash my finger into tiny pots and mess up the roots…problem solved! This prints well fast. I printed at a max speed of 120 mm/s and 0.2 layer height.
Kids wanted some fork that would have out going rails closer together than standard forks put in a row. This is the result, enjoy! As always compatible with every piece of wood in our house … Děcka potřebovala výhybky co by ústily blíž u…
Update: This has been the only crown race on both of my mountain bikes for about a year now and one has been on one of my wife's bikes for the past several months. It works. Saw the 1 1/8" lower crown race design by Jacques Dugal (…
This replaces the portafilter forks in a Baratza Forte or Vario. Since it holds the cup flush to the exit shoot, it makes minor mess and lets you easily transfer to your portafilter. This is designed to fit these style generic cups.
Replacement crush washer for suspension forks with an 8mm shaft - this is most 32mm RockShox and Fox forks. Sized so that it will print with four walls on a Prusa Mk3 with a 0.4mm nozzle - the 1.67mm thickness was suggested by…
Guides a long 2mm hex key to make it easier to loosen or tighten the small screw that holds the rebound adjuster knob in place. The Fox Step Cast 32 is a great fork. Rebuilding one it isn't much more difficult than with the standard Fox…
Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…
Split one of the arm sections from Seabird HH's model, duplicated the forked side, and pasted it onto itself to create an adapter for a Logitech C270, so that I didn't have to reverse the whole assembly arm (I liked drewgraham80's insert…
This is an action cam holder, compatible with GoPro type mounts, for bikes forks (diameter of 42.2mm). Because your cam needs then to rotated, I included the platform with 4 positions. Easy mounting with the knobs on pivot. The screws…
Imported From Thingiverse: A Fork and Pallet attachment for Vector Robot, also compatible with Cozmo If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
More sizes of fork hooks for the IKEA Skadis universal hook system by CSD_Salzburg.
Two tones because I ran out of filament mid print… tired of using cups that would get knocked over / tip over. should fit on most regular sized printers, might need to print at an angle to fit.
The Forks for Your salad. Print instructions Material :PLA Resolution: 0,1 Infill: 10-15% No Support
Small and quick Replacement Print for broken Forklift Forks Printed with PLA and 15% Infill
It is a really simple design and based on the original from DELEKS. The original Fusion 360 project is included as well as STEP data, which can be used directly in Prusa Slicer. All parts are printed in ESUN PLA+ with 0.15 layer…
A small ground forks that can be used to mix soil for transplanting or in your home composter.
Jedná se o výměnné příslušenství pro manipulátor BruderToys - Pallet forks (paletovací vidle). Díly boků slepit s panelem. Nezapomenout nasunout vidle :-) Ať slouží.
Printed with PETG, 15% Infill. No Support. You'll also need an M6 socket head cap screw and an M6 nut. Consider decreasing the layer height on the top section of the AirTag bracket model. The walls in that area are relatively thin, which…
The Ortlieb bag is slick but the mounting bracket assumes three M5 holes in the fork, spaced 64mm apart. Unfortunately my Specialized fork had only two holes, 155mm apart. So I made this adapter to let you mount to the two existing holes.…
An insert for the tray for little Spoon and Forks. Its a bit higher, so Kids can get to the Spoon and Forks.
This model is copy of Park tools overpriced saw cutting guide. There is main M8 bolt for tighting down the tube (You can use any M8 bolt you want if you dont trust plastic bolts just dont puncture your carbon tube :D). To connect Part 1…
This adjustable-width bamboo cutlery organiser is sold under multiple brand names, but is fairly commonplace. This model permanently keeps it open to the maximum width, and hardly noticeable when inside a drawer. Make sure to print it…
This is a vertical organizer for forks, knives and spoons, so you can store the cutlery on the cabinet door and free up, use it and abuse, just keep your kitchen clean a a safe space, your wife will apreciate it!!!! There are two…
Kitchen basket for spoons, forks and knives. Basket size: 130x130x130mm. Print in place no support needed.
I will up load a adper to fit this specific toy that glue onto the back of forks but if want you make your own adapter to fit a different model print pla + or petg
If you like this model, please consider a donation: Buy me a coffee link
