1 / 2
Motorcyle Headlight Bracket for 32mm Forks KLX DRZ 125 — zdjęcie 1
1 / 2

Motorcyle Headlight Bracket for 32mm Forks KLX DRZ 125

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hold up a headlight bucket on your dirtbike

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

About

We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with other bikes provided they have a 32mm fork tube I am sure. 

The bracket sticks out kinda far to accommodate some other electrics, if you want it modded let me know. Doubt anyone will use this!

Printing

I print with one of the arms facing the build plate, requires minimal supports, but youll probably have to paint some on for best results. I will try to include a 3mf. 

I printed mine from PET-GF (not to be confused with PETG) 3 walls, 20% gyroid infill.

PET-GF is pretty strong. It would work fine in PLA for a weekend, but  would probably deform with heat from the sun after a bit. PETG would work potentially, but I have had it break and shatter with other headlight brackets. ABS/ASA/Nylon/TPU would all probably suffice as well. 

Tagi