Liczymy pasujące modele…
This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…
125mm & 150 mm sandpaper holder with floating dividers for easier organisation in the workshop. The Cradle is not my design I have remixed it a bit for my needs. I added the dividers since the use for me depens on the type of job I do. So…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
This is a tool to hold the Clutch in place to remove the nut in the middle of the clutch. It works with a lot of Honda Benly Engines, like the Honda Rebel 125, CB125T or Super Dream. Category: Automotive
This is an adapter to put a 60mm Pocketbike Airfilter onto an Honda Rebel 125 carburetor. Category: Automotive
My scanner fell two times to the floor one week appart! I had to disassemble it and glue the broken hinge. Twice. So I designed this stand. I printed it in two parts, glued them together. Then I sticked it to my desk. Now it's not going…
Got this Honda CRF125FB for my kid and wanted to limit power until he's used to clutch, gears and power this bike offers. As this is newer model with fuel injection, designed this small part which can be easily attached to throttle body…
This is a remix of protective covers designed specifically for the Knipex Electronic Super Knips 78 71 125 – perfect for keeping those precision tips safe in your toolbox or on your bench. The design is based on the original cover by…
This is a spacer for the BMW r1250GS battery compartment. It should also fit the r1250r, and r1250RS Or any motorcycle by scaling the dimensions in slicer Designed to fill that empty gap left by a smaller and lighter lithium battery when…
~ 1/4 scale Made on Tinkercad An update for this was long overdue. This was originally (V1) my first model and I have now since learned a lot about 3D modelling and have improved the design physically and visually (V3).…
Prusa Core One + Particle Evacuation System Print Settings: This model is optimized for PETG printing at a 0.2mm layer height. Supports are required for: The base The upper part of the closure valve The pipe elbow update : Base horizontal…
Case for ZK-QCC, there is alot of error because i didn't test it, and the screw hole is a M3, for the QCC, you have to put it on yourself (IF SOMETHINGS WRONG JUST GIVE ME ADVISE PLZ)
This is a custom made part to replace the cover found behind the divers seat on a Yamaha MT-125/ R125 (2014-2019). Part Number: 5D7-F4796-00-00 Custom made in Autodesk Fusion as a novice. Background When I bought my MT-125 second hand,…
Metric washers according to DIN 125 Form A. This model has been requested by Fsh.
Metric washers with one-side bevel according to DIN 125 Form B. This model has been requested by Fsh.
Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.
I was looking for this adapter everywhere, but all the options were either non-existent or too expensive where i live. Disclaimer: this is not a permanent fix, it should be only quick and short-term solution. This doesn't apply if you're…
One day, i break my old turbine on Dexp FD-1250-P dryer, and desined my own
NOTICES (herunterscrollen für deutsche Version / scroll down for German language version) Non-commercial provision of a single construction file in STL-format for an adaptor for a frame-like aftermarket rear turn-signal holder for Yamaha…
I rebuilt the original speed cable mount for the Yamaha YBR 125 motorcycle. Enjoi! It's free :D
This model can be used for inline filtration of particles, dust, soot in ventilation setups. When saturated, the filter can be replaced via the lid. The holder accepts cheap Ikea UPPÅTVIND particle filters. It was printed in PLA…
Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance. With this jig you can: Use generic or bulk sandpaper with Festool STF D125 (125mm) sanders Punch the correct hole pattern into…
Template for DIY guitar pedal assembly in 1590B enclosure. Designed to ensure correct potentiometer and switch placement and simplify soldering outside the enclosure. 3x3 grid of 8mm holes, dX = 18mm, dY = 12mm (see attachment).…
This adapter connects an AEG EX 125 ES Orbitalsander directly to a Kärcher vacuum cleaner (MV3/WD3) by replacing the dust bag. The printed version seen in the pictures is before adding fillets, and this fit well. Never printed the version…
Parametric Lathe Faceplate Adapter 72mm-125mm. This adapter is meant to mount a Faceplate of size 72mm to a lathe with size 125 mm. As very temporary solution the PETG version can be used (95% infill recommended):…
Replacement for discontinued Nice PAD1250.4525 part. Best printed in PA12 without fillers. Repurposed for PH2
BMW R 1250 GS Adventure Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This holder is specifically designed for the KNIPEX 70 (01) 125 diagonal cutting pliers and mounts directly onto an IKEA SKÅDIS pegboard . Print Settings Recommended settings for best results: Layer height: 0.2 mm Infill: 20–30% Supports:…
This one replace the rear hook under the seat when it brakes.
A custom dust extraction adapter designed to connect the Milwaukee M18 BOS125 Random Orbit Sander to a Bosch Vacuum Cleaner (standard 35mm hose). Snug fit on the sander's exhaust port. Compatible with standard Bosch 35mm vacuum…
Holders for sanding discs, designed to be wall mounted. 80, 120, and 240 grit labels available, as well as a blank face. Oriented face down. Support required for "wings".
Snap fit, supportless, 100% 3D printable. I used tiny bolts and nut to secure the membrane, but give it a tap in the 3 holse with a hot soldering iron to fuse them together permanently, if you do not have bolts. Membrane should be just 2…
An Open 6x17 v8 lenscone for the Fujinon CMW (W) 125mm f5.6 large format lens. This version has a Focal Flange Distance of 119.9mm. This will need to be paired with a 17-31mm M65 helicoid, and a 3D printed lensboard to attach the lens.…
Remix All credits go to the original author, license is the same. This remix is more durable and easier to print. I cut off the sharp corners in the finger slots since attempting to print super sharp features result in fragile parts.…
Descripción: Este es un reemplazo para el cubre radiador de las Yamaha YZ de dos tiempos. Ideal si buscás una pieza econ
This is a Gridfinity bin for a Mitutoyo ABSOLUTE ID-C125RXB. The Bin is 5x2. There is a space for 6x2 Magnets in the corners. Base generated using Gridfinity bin generator. Custom tool cutout designed from scratch.
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
A scanned 3D model of the interior of the "pet carrier" underseat storage bucket for a 2016 or later Vespa GTS 125-300. I used this as a cutting tool in Fusion to design a custom organizer; it's not meant to be a printable replacement…
Models I've used for the kitchen ducting
Dieses Modell ist ein nachkonstruierter Druckstößel (Pushrod) für den Hauptbremszylinder der Vorderradbremse an der Fantic XMF 125 Competition und Performance (Baujahre 2021–2022). Da das Originalteil von Fantic üblicherweise nicht…
Cover Key for Vespa GTS 125/300. Is the original cover broken? Print a new one in one piece! 3D printing settings Material: PETG Nozzle temperature: 230°C Plate temperature: 60°C Supports : YES Support Placement: Touching Build Plate…
This model is compatible with the lego system.
These are made from a 3d scan of a africa twin handguards modified and scaled down to fit the honda monkey. spacers included to be used with the standard bar ends, recomended to use 15% infill adaptive layer height support enabled with…
Voici quelque pièces de remplacement que J'ai déssiné pour restauré mes alt125 et lt125 il y a tout les modèles de bushing qui vont sous le banc a imprimé en tpu il y a aussi le rubber du shifter ( 84 a 87 le 83 est pas le même) il y a…
Premium Windshield Mount for QJMotor 125SRV (2025 Model) Designed with precision and passion, this custom-engineered windshield mount is the perfect upgrade for your QJMotor 125SRV 2025. Built specifically for this model, it ensures a…
While building DIY airbrush booth, I needed a flange for 125mm tube fan (generic one, used in bathrooms, kitchens). Fan fits inside, and using 6x M6 Screws you can mount this (no threads needed, screws will make them). In Slicer, you can…
Yesterday at the gas station, I noticed that this thing had broken, and now the fuel filler flap wouldn't close. I decided to buy the OEM part online, but the price of £25 without shipping shocked me. Then I decided to find a 3D model…
PETG recommended, PLA might get by. SLICING SETTINGS: 4-6 walls, 0.2 Layer height, min 25% infill, max 50% infill Has your Husqvarna 125L safety lever cracked? Look no further than this model! My dad has been using this weed eater for…
Parameters: PLA 0.4 mm nozzle 4 walls/perimeters alternate extra wall 0 top shell layers 0 bottom shell layers 15% honeycomb infill no support no brim added modification block for sanding paper grit label bottom and top shell layers…
Overview If you have a Yamaha P-45 (or any P-series digital piano) with the matching L-85 wooden stand, you know that the side panels are great but offer no place to put your accessories. I designed these three simple, slide-on gadgets to…
If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…
A printable and laser cuttable spacer for 0.5'' hex shafts with tolerance for ease of use.
Horní uchycení krytu předního tlumiče T-mec 125 použité tavné matice a šrouby pro kompletaci
Držák spz a led osvětlení https://www.alza.cz/yshop-led-osvetleni-spz-moto-s-kabelazi-homologovane-d10875786.htm
Gridfinity Bin for a Knipex 7861125 Plier Body with extra inlay Easy to print Stackable Files Knipex Gridfinity Body Knipex inlay .step-File
About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…
About Needed some lighting for a KLX125 aka DRZ125 which does not have a lighting coil. Considered winding the coil, but really only needed it for a weekend, and a dewalt 20v battery seemed like a common suggestion. I used a cheap adapter…
Customized version of http://www.thingiverse.com/thing:1571860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 34.9 Nozzle_Chamfer_B = 20…
Originally manufactured by Aérospatiale and Eurocopter it was designated the AS350 Écureuil (Squirrel) or A Star. This entered the market on October 27, 1977, and would reach the American market a year later. January 2, 2014, Eurocopter…
[UPDATE: New, stronger version here: ] [Older version below] Print in place bag clips 50mm, 75mm, 100mm, 125mm and 150mm. No supports needed. Just print, take it from the buildplate/heatbed and use. Mine are printed with PETG 0.6mm…
Extension platform for Parkside 125mm disc sander. I use it primarily for re-grinding of 25-degree bevels on chisels and plane irons. The platform serves as a surface on which a honing guide can rest. The material removal is less…
Zwei verschiedene Messuhrhalter für eine Multifixaufnahme B. Für Längs und Plan Messung. Maße siehe Zeichnungen. Montage über Gewindeinserts M5 (M6) - dazu Mutter M4 und Halteschraube M6 Two different dial gauge holders for a multifix…
This is the voronoi edition of my cover system for Juwel Rio 125 fish tank. For further parts and instructions look here: https://www.printables.com/model/684272-modular-lidcover-system-for-juwel-rio-125-led-aqua See also my other fish…
For 5-hole rims (cast + spoke) PETG is not absolutely necessary, PLA works. I would recommend using 3 - 4 wall lines and 20 - 30% infill. Layer height 0.2 mm. The brand name is used solely for descriptive purposes to indicate the…
This are active cooling parts for my cover system for Juwel Rio 125 fish tank. For further parts and instructions look here: https://www.printables.com/model/684272-modular-lidcover-system-for-juwel-rio-125-led-aqua See also my other fish…
Does what it says. Designed specifically for a TI-1250 vintage calculator. Probably would work for lots of smallish calculators though. Requires 2 of these Elfa pegs also.
A 125mm angle grinder mount that uses Sy's Peglock system. (Printed without supports)
A simple holder for a Knipex 7861125 Sidecutter. Made for the Ikea Skadis wallmount. Uses the excellent T-nut system.
This is an adapter ring that allows for a Fujinon SW 125mm 5.6 aperture medium format lens to fit the appropriate lens cone and board for the chroma six 17 camera. I received mine and the shutter isn't what was recommended so the lens…
Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
I made a remix via the original creators parametric file to use with metric sizing. It now takes 1x 125mm duct and splits it into 3x 100mm ducts. I printed mine on a Bambulab P1S using Polymakers ASA with 5 walls and 10% infill. If you…
Vzhledem k cenám v hobymarketech se vyplatí mřížku vytisknout i při ceně filamentu kolem 500kč za kg. Snad to někomu pomůže. Lze tisknout bez podpor, jen středová výztuha je vizuálně horší, ale přes mřížku to není moc vidět. Tisk : PETG…
Kazmar's bearing: https://www.printables.com/model/587056-ptfe-tube-bearing-608 since the spool holders don't have much load, these PTFE bearings work great
Es handelt sich um eine Wandhalterung für 125mm Trennscheiben etc.
Vielleicht kann einer von euch den Deckel gebrauchen, er ist für ein KG Rohr DN125
Print in PETG or ASA since there will be water contact all the time. Use the scaling function in your slicer for other sizes or use my other model.
A boot for the 64oz Iron Flask, 125mm ID, printed in Bambu TPU 95A HF. Printed with 3 walls and 15% hexagon infill. Prints fast, uses little TPU, works like a charm and fits perfectly.
I designed this sturdy container for storing 125mm angle grinder discs, the discs slides securely onto the spindle in the middle and can be viewed from the opening on the side to see what discs are stored inside. Use supports for the…
Adapter for extending the Revopoint Miraco T-125 turntable to 350mm. 3D Markers with a diameter of 7mm and a center marking are integrated on the plate (multicord print wit Prusa XL).Adapter with thread for screwing onto a tripod to use…
EDP controller board for NT116WHM NT125WHM-N42 1366X768 MINI HDMI LED 2 TYPE C LCD controller can be found here: https://www.ebay.com/itm/166465703483?var=466110114895 Printed with PLA, threaded inserts are also needed to put the parts…
125mm pvc tube plug. Its all. Recommended to glue with pvc glue or similar
I lost cover of the swivel frame locking nut. 20€ for an spare cover (again I lost one before) wasńt an option so i designed my own. Ich habe die Abdeckung für den hinternen Feder Schwinge wieder einmal verloren 20€ waren mir zuviel also…
Heyho. Quite some time ago I designed this adapter for my cordless screwdriver. I really like to use the discs with foam cussion beneath the velcro. But for some Parts I really had to keep the surface flat and clean and not round the…
eine kleines update für die brixton felsberg 125 damit kann man den sitz erhöhen vone so das man nicht mehr so nach vorne gedrückt wird die puffer solte man in TPU drucken und vorne der glotz aus TPU oder besser petg so sitzt mann gerade…
Ready for MMU. Print the partitions on their side with 0 top and bottom layers. I used honeycomb infill.
