Sanding Disc Plate 125 mm 4 Cordless Drills
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
125 mm Diameter Plate for Cordless drills. With air channels to cool it :D
- Ocena
- 0 / 5
- Polubienia
- 139
- Pobrania
- 252
- Wydruki
- 0
- Wyświetlenia
- 1700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho.
Quite some time ago I designed this adapter for my cordless screwdriver.
I really like to use the discs with foam cussion beneath the velcro. But for some Parts I really had to keep the surface flat and clean and not round the edges.
So I designed this adapter.
When I first designed this I wanted to overengineeer it a little bit I guess xD I designed it to add 3 x M2 Screws for a better layer adhesion in the middle section and I added air funnels to cool the plate down while grinding.
Well I don't really know if it was necessary but it worked out for many projects yet! So Don't touch a running System :P
Print Instructions:
Use Heat resistant and tough materials! My first prototype was printed in (Prusament) ASA and later on I printed some plates with (Nobufil) PCTG. But PETG should work fine too I guess!
0,2 mm layer height, 100% Infill, 3-4 Perimeter.
In addition to the printed parts you will need an M14 Screw adapter and a self adhesive Velcro with 125 mm Diameter. You can find these parts everywhere online for a few bucks. Examples:


Have fun!