1 / 2
Wall Tape Rack - All Sizes (5 - 15 mm dowels) — image 1
1 / 2

Wall Tape Rack - All Sizes (5 - 15 mm dowels)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use it to store every size of tape, or other stuff.

Rating
4 / 5
Likes
8
Downloads
27
Makes
1
Views
136
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Easy to print wall-mounted rack for tapes or many other stuff. It holds almost every standard tape sizes, even the very small ones when nearly emptied.

Use any dowels you have or like (wood, plastic, carbon fiber etc.). I used old arrows made from carbon fiber.

You can use the same model mutliple times for the same dowels to increase strength if you want to have longer rails.

The model was designed not only with printer tolerances in mind, but also with the dimensional variations of the dowels, which can be quite noticeable for wooden dowels. This is usually not an issue if the mounts are only installed at the ends of the rack. However, if an additional mount in the middle is desired to increase stability on longer racks, the slightly looser fit can make it easier to slide the mount into position. If anyone is interested in the same model with narrower tolerances, please let me know and I can adjust them accordingly. Alternatively, you can use XY compensation in your slicer to correct holes that print too large.

Tags