3D Printed Stackable Box Honeycomb (less material) | REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed Stackable Box Honeycomb (less material/filament) | REMIX | 150mm x 80mm | 3 different versions
- Rating
- 4.333 / 5
- Likes
- 129
- Downloads
- 618
- Makes
- 5
- Views
- 1,840
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
3D Printed Stackable Box (less material) | REMIX | 150mm x 80mm
note: Since the original file is quite sturdy and strong, I decided to remix a "lighter" version of the crate. See the material differences in the slicer-comparison-pics above! And the yellow & green printed crates in the pictures are the 1.5mm walls version, the grey & black ones are the 2mm walls version.
Printing advice: 2 perimeters, 0.2 layer height, 20%infill, support on bottom-overhang only, see in the slicer pics! And PETG ftw!
So there are 3 different versions now:
3mm Walls - ca. 86g (grey, original file)
2mm walls - ca. 73g (blue)
1.5mm walls - ca. 65g (green)
