Raspberry Pi 4 Modular Stacking Cluster Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.63 – €0.76 net (excluding VAT)
For file: Add bottom and top .gcode files / raspberry_pi_4_case_stacking_cluster_module_bottom_pla_41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 40.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This a case for the Raspberry Pi 4 that allows you to stack an arbitrary number of cases on top of each other for…
- Rating
- 4.667 / 5
- Likes
- 76
- Downloads
- 604
- Makes
- 4
- Views
- 5,896
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This a case for the Raspberry Pi 4 that allows you to stack an arbitrary number of cases on top of each other for cluster raspberry pi builds. The thumbnail shows 3 but go as high as you like. Each middle clips into the ones above and below. When you are done stacking, add a top and bottom to the stack. To be clear: You print out as many middles as you want, and cap the stack with a single top and bottom.
EDIT1: Reuploaded with additional STL for a bottom lifter that allows air flow to the bottom Pi. Renamed the main stacking module to "middle." Credit to user IGV2016 for suggesting the addition of a bottom to the stack to improve air flow.
Category: Electronics