Dust Cover for Magnifying Glass Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust Cover for Magnifying Glass Lamp with 103mm lens
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Dust Cover for Magnifying Glass Lamp
A while ago I bought a magnifying glass lamp. After some time, I noticed that a lot of dust was gathering on the lens, and I had to clean it every time before use. To solve this, I decided to design a simple dust cover.
https://www.amazon.de/dp/B0CTT8BMPX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Print settings:
Material: any (I used PETG)
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 10% is enough
Perimeters: 2
Supports: not required, but may help with printing the hole in the cover.
Brim: no
Assembly instructions:
Glue the handle to the cover using any plastic-compatible adhesive. I used instant (cyanoacrylate) glue.
The cover fits lamps with a 103 mm diameter magnifying glass.