1 / 3
Dust Cover for Magnifying Glass Lamp — zdjęcie 1
1 / 3

Dust Cover for Magnifying Glass Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dust Cover for Magnifying Glass Lamp with 103mm lens

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Dust Cover for Magnifying Glass Lamp

A while ago I bought a magnifying glass lamp. After some time, I noticed that a lot of dust was gathering on the lens, and I had to clean it every time before use. To solve this, I decided to design a simple dust cover.

https://www.amazon.de/dp/B0CTT8BMPX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Print settings:

  • Material: any (I used PETG)

  • Nozzle: 0.4 mm

  • Layer height: 0.2 mm

  • Infill: 10% is enough

  • Perimeters: 2

  • Supports: not required, but may help with printing the hole in the cover.

  • Brim: no

Assembly instructions:
Glue the handle to the cover using any plastic-compatible adhesive. I used instant (cyanoacrylate) glue.

The cover fits lamps with a 103 mm diameter magnifying glass.

Tagi