1 / 1
1/8 NPT & 3/8 NPT Protective Caps (Male & Female) — image 1

1/8 NPT & 3/8 NPT Protective Caps (Male & Female)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This set includes both Male and Female protective caps for the two most common small pipe sizes (1/8 NPT and 3/8 NPT)

Rating
0 / 5
Likes
4
Downloads
28
Makes
1
Views
110
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This set includes both Male and Female protective caps for the two most common small pipe sizes in automotive and industrial plumbing: 1/8 NPT and 3/8 NPT.

These are perfect for sealing off ports on turbochargers, oil sandwich plates, fuel rails, or intake manifolds while your engine is being built or stored.


📐 Understanding NPT (Why they don't screw in all the way)

If you are used to standard bolts (Metric or AN), you might be surprised when these caps stop after only a few turns. This is normal.

Unlike "straight" threads, NPT (National Pipe Taper) threads are cut on a 1.789° taper.

  • The Wedge Effect: As you screw the male end into the female end, the diameter of the male part increases while the female part decreases.

  • Engagement: In real steel fittings, you typically get about 3 to 4.5 threads of hand-tight engagement before the threads "wedge" together to create a seal.

  • The Caps: These 3D-printed caps mimic this taper. Do not force them. They are designed to sit snugly after a few turns to keep dust out.


🛠 Print Settings

  • Material: PETG is recommended for better chemical resistance to oil/fuel residues and better thread flexibility.

  • Layer Height: 0.15mm (High detail is essential for the tapered NPT threads to function correctly).

  • Infill: 20% is plenty for a dust cap.

  • Walls: 3 wall lines.

  • Supports: None needed.


⚠ Disclaimer

These are DUST CAPS ONLY. Because NPT relies on metal-to-metal deformation and sealant (Teflon tape) for a high-pressure seal, these plastic prints should NEVER be used in a pressurized system or on a running engine.

Tags