Mini Lathe DRO Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thanks to the quarantine, I started and finished a project that was sitting on the bench for years... If it set for…
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 112
- Makes
- 1
- Views
- 1,472
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Thanks to the quarantine, I started and finished a project that was sitting on the bench for years... If it set for that long, it means it is not a necessity. And it is not! But it is cool and handy.
DRO was bought online, nothing special. I used M3 bolds and nuts to hold the DRO to the brackets, an M5 that was already there for the threads dial. And 2 more M5 for the other end, which I had to drill and tap. Be careful when drilling into cast iron, it is soft!
Print Settings
Printer:
AM8 + Titan Aero + MKS
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Filament:
Inland PLA
Blue
Notes:
I used 10 walls to ensure enough strength around the screws. This way, the bracket will not colapse when torquing the screws down.
Category: Machine Tools