Mini Lathe DRO Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to the quarantine, I started and finished a project that was sitting on the bench for years... If it set for…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 1472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Thanks to the quarantine, I started and finished a project that was sitting on the bench for years... If it set for that long, it means it is not a necessity. And it is not! But it is cool and handy.
DRO was bought online, nothing special. I used M3 bolds and nuts to hold the DRO to the brackets, an M5 that was already there for the threads dial. And 2 more M5 for the other end, which I had to drill and tap. Be careful when drilling into cast iron, it is soft!
Print Settings
Printer:
AM8 + Titan Aero + MKS
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Filament:
Inland PLA
Blue
Notes:
I used 10 walls to ensure enough strength around the screws. This way, the bracket will not colapse when torquing the screws down.
Category: Machine Tools