Vented Media Center Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My house has a 14" x 14" Leviton Structured Media Center (47606-140) where all of the Ethernet runs to. I'm working…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
My house has a 14" x 14" Leviton Structured Media Center (47606-140) where all of the Ethernet runs to. I'm working through upgrading my home network. Part of that is adding a larger managed switch with PoE. I wanted to add a door with some ventilation. There are a few options out there, but they all seem too expensive for what you get.
Leviton provides the DXF file online with the specs for the box. I imported that into Fusion as a sketch and used it as a starting point to get the size and hole placement exact. Once I had my main design done, I had to split it into 4 sections to fit on the printer bed. I added angled tabs to help with alignment. I also added some cutouts so you can run wires from the top or bottom if you need.
I used 5 minute epoxy to glue the panels together. Once that cured, it works exactly as I need. It would also be easy to extrude the sides out more to give additional room inside of the box.
I printed this with PLA+, 0.28 layers, 15% infill, no supports needed.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 Max
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
10%-15%
Category: Replacement Parts