1 / 6
Royal Shield - Legend of Zelda BOTW — image 1
1 / 6

Royal Shield - Legend of Zelda BOTW

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The perfect item to go with your Royal Broadsword!

Rating
0 / 5
Likes
20
Downloads
51
Makes
0
Views
231
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial — Share Alike

I made this model by downloading the original game model, upping the poly, and optimizing it for 3d printing. 

There are a few different ways of making this model:

1: you could print the rim and make the backing out of EVA foam, which is what I did, and 2: you could print the backing. It can be somewhat difficult to get the dome to be pronounced enough for the embellishments, when using EVA foam, if the embellishments are too arched you can shoot them with a heat gun and flatten them out. I have not printed the backing, but the embellishments should go on it just fine... I think.

All pieces require supports over the entire bottom.

There are two sets of handle brackets: the first are the original brackets pulled straight off the model and optimized for 3d printing, however after assembling my shield with the original brackets, I felt that they were too long and the handle was too far away from the back of the shield to be comfortable. So I made a shortened version.

I have made this shield as closely scaled to the Hylian Shield(in the game) as I could, the Hylian Shield pictured is by: m h, and can be found here.

The main purpose of making this shield was to go with the Royal Broadsword by CarlThePumpkinMan

If you have any questions problems or suggestions please let me know!

Tags