95 models
No supports needed. Make sure that the bed is clean and the first layer adheres properly. It is a good torture test for print bed adhesion and filament retraction. Good luck and happy printing ! ^-^ *Version 1.35 has improved legs so they…
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for one variant
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
Print approx. €42.13–€51.49 excl. taxPreliminary estimate for one variant
This ancient crawler will silently protect your plants! Not so small interpretation of a guardian can be printed without hassle and supports of course :) Inspired by BOTW game, references; I recommend printing the “Back-head” first to see…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
I made a Remix of my Bokoblin BIG SIZE Chest. it has a lot of space !! look at my other Chest https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and- - Infill 15% - Support yes
This little creature does require support for the body. There's pre-sliced and pre-supported files for both Bambu and Prusa. The colors can be whatever; this can be shades of green, orange, blue. Whatever you have ! The nice color of the…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
Includes: Link (Not the archery pose, don’t have that one. Sorry!) Default Link (Unequipped) Zelda Ceremonial Zelda Mipha Daruk Revali Urbosa Sidon Yunobo Teba Riju Paya Purah Kass All with or without a platform! They’re definitely going…
Hyrule map from Legend of Zelda: Breath of the wild 4 pieces of map: hyrule_map_1.stl hyrule_map_2.stl hyrule_map_3+5.stl hyrule_map_4+6.stl I suggest cutting a plastic sheet or balsa wood sheet as base and glue the piece to the base I…
These pieces are nearly 40 cm tall and have a very small footprint. I truly have to discourage you from attempting to print these. I created these files by request. Unless you have an incredible amount of confidence in your printer's…
sheikah slate, easy to print
I made a Remix of IXPatch Bokoblin Chest for my Switch Games or Blue-rays i added 2 options to print the Chest - 2 pieces bottom and top - 4 pieces 2 bottom parts and 2 top parts (cut in the middle) you also need 2x M6 x 60 screws and 2…
I had a hard time printing greggo 's Customizable Korok so I just cut it in half at a place that was easy to print with no supports, then glue together. Category: Toys & Games
Zelda BOTW divine beast keychains. Size around 65mm x 60mm and 3mm thick Start with color and change to white at layer #11 (2.2mm)
The Zelda Breath of the Wild logo to print as wall art. Printed very well with a 0.4 nozzle, 0.2mm layer height, 15% infill
Create your own Guardian from the game The Legent of Zelda: breath of the wild! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee…
I've had several requests for a single piece blade for my Master Sword design. This will be perfect for belt printers!
I had some issues printing this model so I added some brims to the problematic parts.
The Legend of Zelda: Breath of the Wild themed coaster, optimized for 0.2 layer height and 5 color changes. I did not have all the filament colors necessary, so I painted my own version.
print out 6 of these and glue to the master blade.
Joycon grip with BOTW logo on it for resin printer. I do not recommend printing on MDF printer as logo details will be lost. Please do let me know if there is anything wrong with the model
Shrine dice roller remix. Mini dice are best.
Print yourself a commemorative trophy for finding all 900 koroks in BOTW. This print includes the files to modify the statue to your liking or to simply print a premade one. Post your makes and share with your friends.
Unprofessionally “Fused” the Joiner and Anchor, added some internal fill to make it more solid because it kept breaking. I personally printed it at 75% because I did not want it to break again. You can try it out with whatever infill you…
Just a negativ cutout so they can be printed in a another color
Update! Through popular demand, I have made some slight modifications to the model to make it printable by X/P/A series of BambuLab printers, and have uploaded the corresponding 3mfs! You should print the original ones if you can, but if…
Created as a small version of The Master Sword from The Legend of Zelda Breath of the Wild. Modeled in Fusion 360 after the artwork version found at Gamepedias Zelda Wiki . When printed, the sword is about 75 cm (~30 inches) long. The…
This is a remix to SuperheroDIY's master sword mount. I resized and removed some material. This fits the toy version of the master sword you can get off amazon for costumes. Print at 0.2mm layer height, no supports, ironing on visible…
after 8h of printing i saw that 2 parts havent enough Adhesion, so i added a hardcoded brim like in the orgiginal files from Popandsicle
My kids wanted to have a guardian sword from the game, so I created a simple replica. Built of two major pieces - a blade and a handle that slides together and can also be secured using a M4x20 countersunk screw with nut, or similar size…
Made the print in place Mini Octopus, but felt something was missing. So I decided to make it a cyborg, by adding a Guardian's head from Breath of the Wild. It makes a great gift for someone who likes Zelda. I used 3D builder to chop up…
I found this amazing model for a simple Nintendo Switch Pro controller . It had so many likes and makes that I just assumed it worked and fit perfectly. It did!!! I left the main body totally unaltered. But I wanted to add a wall mount…
I recommend scaling the model down to 75%
**If you print it please post a make and let me know how I could improve the model My autistic son watched me play Legend of Zelda: Breath of the Wild and fell in love with Hinox. He asks me to print hinox out frequently. I decided to…
This remix was largely inspired by Popandsicle's Master Sword , and it's Remix by KurtGamexp. I loved CarlThePumpkinMan's Model so much I just had to print it, but I wanted to make sure it wouldn't break while I was playing with it. I…
I create the Stone from BOTW to disply the awesome sword from Popandsicle . I know its not the perfect scale but it had to fit on my i3 Mega. for a easy swap i print this two parts a second time to swap only the handle ;) Blade Joiner…
This is a botw switch dock i made, It has an airgap to prevent the sides from touching your switch however you can put some felt inside for extra security
This detailed 3D printable statue depicts Purah , the brilliant Sheikah researcher from The Legend of Zelda: Breath of the Wild . Known for her youthful appearance, expressive personality, and iconic goggles, Purah is faithfully recreated…
Hello, Here is a decorative plate that can be hung on a wall or displayed on a table using a stand. The print is easy and fully optimized for FDM printers, requiring only four filament colors : black, red, yellow, and white. No manual…
Stand-up desk art of the Zelda Breath of the Wild logo. Model is 5" x 0.197" x 8.5"
Zelda bokoblin chest to store micro sd and sd cards
A Botwoon. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Since I wanted to print this bigger than my print bed, I cut this with jigsaw connectors to help with the alignment when gluing. If you have a printer large enough to print this in one piece (or if you want to cut it yourself), use the…
Loved the original Master Sword Base by Pdor_Projects but I wanted to be able to use it for the full size master sword. Hole is remade to fit full sword as well as stand height is increased to ensure it's stable. Infill can be very…
Very simple and easy enhancement to your Bokoblin Chest!
You can now “go, and bring piece to the world” in your own garden! This is a three-part mold to cast a concrete or cement BOTW/TOTK Zelda goddess statue. You want to print these in a way such that you will not have supports on the inside…
Print with standard settings, and paint with an array of blues, with yellow and red for the eyes! (:
This model is of a Korok from the Legend of Zelda, and I have it sectioned into 4 files. The base I covered in modelite clay, enabling increased surface are to adhere the Korok feet for stability. Each part was individually painted, and…
Fire Sword from the video game Breath of the Wild! It has a slot for 1/4 inch rod for support/connector. The slot has a 6.55m diameter I did the best I could using fusion 360! Please let me know if there are any issues with the model…
There are 2 models w/ 2 sizes each. The large size is best for .4 nozzles. The smaller sizes are best suited for .2 nozzles. They CAN all be printed in .4 but the smaller ones won't have the best resolution. These are made to be multi…
Bring the Hero of Hyrule to your desk with this custom Link figurine , inspired by The Legend of Zelda: Breath of the Wild . This model features Link in his iconic Champion's Tunic , standing in a dynamic "on-guard" stance with his sword…
I made this model by downloading the original game model , upping the poly, and optimizing it for 3d printing. There are a few different ways of making this model: 1: you could print the rim and make the backing out of EVA foam, which is…
TOTK/BOTW mighty bananas. Strength boost when cooked inn a meal.
This detailed 3D printable statue depicts Purah , the brilliant Sheikah researcher from The Legend of Zelda: Breath of the Wild . Known for her youthful appearance, expressive personality, and iconic goggles, Purah is faithfully recreated…
Hello, Here is a decorative plate that can be hung on a wall or displayed on a table using a stand. The print is easy and fully optimized for FDM printers, requiring only four filament colors : black, red, yellow, and white. No manual…
Hello, Here is a decorative plate that can be hung on a wall or displayed on a table using a stand. The print is easy and fully optimized for FDM printers, requiring only four filament colors : black, red, yellow, and white. No manual…
I designed this pattern several years ago to add detail to a set of pieces for the game Tak , because I love the artwork of the Zelda games. Breath of the Wild re-established my appreciation for the art and music of the series, and…
Fantasy warrior queen bust with elven features, ornate armor, bold hair, and a fierce regal expression. Optimized for 3D
A whole bunch of guardians from Breath of the Wild. Includes a fixed leg guardian, an articulated guardian, and a skywatcher. Hope you enjoy! I will try to upload photos when I have time. Note: Some of the heads won't rotate very well.…
Sheikah slate Diplay Skin Prusa Display skin based on the Zelda BOTW sheikah slate The skin uses the original mounts, no modifications needed on your printer. Print instrucitons No MMU Needed, parts with details, decorations, can be…
A man's great sword or a Giant's Knife? You decide. Based on the version seen in OoT and BotW, my Biggoron's Sword model stay true to the in-game design, but has increased detail to make for stunning replica that are perfect for cosplay…
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
Print all the segments, head, tail. The files are not numbered in any particular order, so I've included a reference model that shows the order. The model is in segments that I intend to connect with rigid wire so it is poseable. I…
MUST PRINT THIS IN TPU !!!! …This is just a prototype, I have modeled more to go up your arm more and will upload those when I test print it.
Last pieces for the cosplay for tears of the kingdom
Hello! I took Bolson's charm without them knowing. I'm not sure what it does yet but I feel infinitely more fabulous and outgoing after I wair it. meh, guess it doesn't work. only the center square I found needs support Print Settings…
A life size print of Link's Sheikah Slate from the BOTW Switch Game! Made this last year for a cosplay and it turned out pretty well in my opinion! I printed with about a 15% infill and was very sturdy for carrying around all day!…
Prologue: In the 10 or so months since I posted my Master Sword design, I've had countless requests for some sort of wall mount or display stand design. There's even been several designers that have published their own displays for the…
After struggling with the built-in stand of the Switch, I decided to create one myself.
this is called sword in in botw amiibo and can be found in totk game.
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
This is a remote control holder for one of those color changing LED strips. This is meant to be glued to my sons wall and become a permanent installation. It should fit most of those LED remote strips with the color change remote - they…
This is the small key from the legend of Zelda breath of the wild. this is the first 3d modeled one as far as I can tell, so good job me. I hope you like it. Feel free to leave a comment on what I should do next. Category: Video Games
Print 6 of the legs in TPU and print the body in whatever you want. I used SainSmart TPU for my print. I used supports for the legs and none for the body.
Description: Give those fish friends a cool home with this one of kind shrine from the game breath of the wild. Can be used as a castle in your fish tank or a handy toothbrush caddy for kiddies. Fish Tank Use: Print settings vary. I used…
After printing this and contact the author, I still found the Zelda world map has some stitches, so created one from the height map data provided by this repo: https://github.com/MrCheeze/botw-tools/
Sliding locking openings and internal ramps so nothing gets stuck. I really love this weapon's design, so it seemed fitting to make a dice tower/box out of it. Nice clicking movement and interlocking panels make it feel neat to use! I…
Tillandsia Pod - Decayed Ancient Guardian Zelda BOTW A tiny pod for Tillandsia / air plants - Decayed Ancient Guardian A long time ago, this Ancient Guardian was defeated and now its decayed body is laying somewhere in Hyrule. Time to…
Lizal Tri-Boomerang from The Legend of Zelda: Breath of the Wild for the Nintendo Switch
Heart Container from The Legend of Zelda: Breath of the Wild for the Nintendo Switch
The hylian shield from Zelda Breath of the Wild and Tears of the Kingdom. Made last summer, by myself. Second prop I made, will probably revisit is later after other to make a new version.
I made this planter remix a while ago and forgot about it until I was cleaning the other day, hopefully someone else will find it to be a cute addition to their space! It's a pretty rough remix that was done before I knew how to properly…
Lightbox from Zelda Heart BOTW -Use led White Cold for best render
