Rokenbok Recycling Center Sorter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Separate Roks from Barrels, or even Roks from Roks
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Recycling Center came with yellow refresh Rokenbok Dozers and ensured that your build would always be messy with Roks and Barrels all over the floor.
This model was made as a continuation of me modeling Rokenbok parts that don't have existing models, official or otherwise. What makes this one different from a normal sorter is a removable sorting grate, so you can swap it between the normal plate that separates Roks and Barrels and a special plate that only sorts the smaller red Roks. It now features BV2 of my modified snap. Some other liberties were taken to make it easier to print.
The red Rok plate likes capturing blue Roks. It can be a bit challenging to use.
Print the sorter body right side up with normal supports for the snaps and the snaps should come out great. Print the sorter grates upside down. The resulting arches at the corners may want supports, ymmv depending on filament choice.
Updates:
Forgot to add snaps (how), fixed
Sorter body updated to not trap blue roks when using the barrel sorting grate.