Rokenbok Recycling Center Main Ramp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The heart of the sorter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Recycling Center came with yellow refresh Rokenbok Dozers and ensured that your build would always be messy with Roks and Barrels all over the floor.
This model was made as a continuation of me modeling Rokenbok parts that don't have existing models, official or otherwise. What makes this one different from a normal recycling center ramp is the optimizations for printing. The ramp itself has been simplified and the snaps have been rotated 90 degrees to facilitate printing on its end to minimize supports. Updated to my modified snap BV2.
Print considerations:
Print with ramp facing up as shown in slicer screenshot.
Supports are only strictly needed for the snaps. The normally top facing snap holes have a bridge in printing orientation that can benefit from tree supports.
Use support painting where needed, otherwise use support blockers on the snap holes touching the build plate. Supports in those snap holes will be challenging to remove.