Garmin D2 Air Watch Charging Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garmin D2 Watch Stand for 90° charging connector.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Watch stand for Garmin D2 Air Watch. You can lead charging cable through the groove in the base plate. For easier printing, the stand is made of 3 parts. You will need 2x M3 hexagonal nuts and 2x M3x10 inbus screw.
Should anyone want to use square nut instead, let me know and I will provide this model as well. I simply changed to hex nuts as I run out of the square ones :-)
There are no specific printing instructions. Just print with 0,2 mm layer PLA, 2 perimeters and your favourite infill.
Assembly instructions:
- Print all 3 parts
- Insert 2 hex nuts into the holder arm. Push them firmly to the end.
- Use 2 screws to attach head on the arm
- Insert charging cable
- Push the plug over the center to hide screw heads
Disassembly:
To remove the charging cable, push small flat screwdriver between the plug and cable, twist a little and it will usually jump out ;-)
Arm shape was inspired by Watch Stand by @Fredslund. Check it out: https://www.printables.com/model/27759-watch-stand-no-support