1 / 3
Minimalist Under-Shelf Kitchen/Paper Towel Holder (Updated Slimmer) — image 1
1 / 3

Minimalist Under-Shelf Kitchen/Paper Towel Holder (Updated Slimmer)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A compact kitchen towel holder designed to mount neatly beneath a cabinet or shelf.

Rating
0 / 5
Likes
47
Downloads
163
Makes
0
Views
618
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Minimalist Under-Shelf Kitchen Towel Holder

A compact kitchen towel holder designed to mount neatly beneath a cabinet or shelf. The system uses two fixed mounting brackets and two removable press-fit stub axles that support the roll and allow smooth rotation.

To load a roll, press a stub axle into each side of the paper towel core, then rest them onto the mounted brackets. The roll spins freely while remaining securely located — no long rods, springs or mechanisms required.

Ideal for saving counter space while keeping towels within easy reach.

Features

  • Minimalist, Ultra low-profile design

  • Under-shelf mounting

  • Removable press-fit stub axles

  • No springs or complex moving parts

  • Smooth rotation for easy tearing

  • Designed for standard kitchen towel rolls

  • Both parts print without supports

Printing Requirements

  • Print 2 × mounting brackets

  • Print 2 × press-fit stub axles

  • No supports required

  • Print brackets with strength in mind, on it's side (3+ perimeters recommended)

  • PLA or PETG recommended

  • Mounting hole sized for standard screws

Assembly

  1. Press the stub axles into each side of the towel roll. Use this as a guide for spacing

  2. Mark, drill and mount the brackets. 

  3. Place the roll onto the brackets.

Simple, sturdy, and space-saving.

Tip: The brackets use 1 screw each for minimal drilling. To ensure that the brackets wont rotate, you can place a piece of double sided tape/sticky pad between the shelf and bracket before fixing with a screw. But for me the screw alone has been more than sufficient. 

[UPDATE] V2 - Slimmed down both the hanger and stub axel.

Tags