1 / 4
Renault Zoe Floor Mat / Carpet Clip Repair Kit | Fußmatten-Clip Reparatur-Set — image 1
1 / 4

Renault Zoe Floor Mat / Carpet Clip Repair Kit | Fußmatten-Clip Reparatur-Set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Renault Zoe Floor Mat / Carpet Clip Repair Kit | Fußmatten-Clip Reparatur-Set

Rating
5 / 5
Likes
8
Downloads
69
Makes
1
Views
320
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Standard Digital File License

English

This set replaces the original clips for the floor mats if they have come loose from the vehicle carpet. Unfortunately, Renault does not offer a suitable solution in this case. Please note the licence conditions for the set below.

The set consists of an upper part, a lower part and an optional installation tool.

Printing instructions:

To withstand the mechanical stress of snapping into place and daily use, I recommend the following settings:

Material: PETG (necessary for temperature resistance in the car and break resistance under mechanical stress)

Nozzle:
0,4  mm

Layer height: 0.15 mm

Specific settings:

renault zoe floor mats button repair top part clip.3mf: 100% filling | Supports: everywhere

renault zoe floor mats button repair bottom part.3mf: 100% filling

renault zoe floor mats button repair assembly tool.3mf: 30% filling | 4 wall thicknesses

Installation instructions:

Preparation: Slide the bottom part with the smooth surface (print bed side) facing upwards into the hole in the carpet. Position it so that it is centred in the hole in the carpet.

Attachment: Place the top part with the ribbed cylinder facing downwards into the hole in the bottom part.

Assembly: Press the upper part down quickly and firmly.

Tools: If your fingers are not strong enough, use the printed assembly tool. Place it on the small button on the top. If necessary, you can tap the tool lightly with a hammer to ensure that the clip locks securely into place.

Support / Coffee fund

Developing and testing such replacement parts requires time and filament for prototypes. If this repair has helped you and you would like to support my work, I would be very grateful for a small donation!

paypal.me/PatUnderlineS

Thank you very much for your appreciation!

Copyright & Terms of Use

These files are provided under strict copyright. By downloading them, you agree to the following terms and conditions:

No redistribution: The files may not be uploaded to other platforms or shared with third parties in any other way.

No commercial use: The sale of digital files and physically printed components is prohibited.

No modification (no derivatives): The files may not be modified or used as the basis for other designs.

For private use by the end user only.

For commercial use, please contact me.

If you like the model, a like and a make would be nice. Thank you in advance. 
I am always open to suggestions for improvements or changes.



____________________________________________________________________________________________

Deutsch

Dieses Set ersetzt die Original-Clips für die Fußmatten, wenn diese sich aus dem Fahrzeugteppich gelöst haben. Von Renault gibt es in diesem Fall leider keine brauchbare Lösung. Beachtet bitte die unten stehenden Lizenzbedingungen für das Set.

Das Set besteht aus einem Oberteil, einem Unterteil und einem optionalen Montagewerkzeug.

Druckanleitung:

Um die mechanische Belastung beim Einrasten und im täglichen Gebrauch zu überstehen, empfehle ich folgende Einstellungen:

Material: PETG (notwendig für die Temperaturbeständigkeit im Auto und die Bruchfestigkeit bei mechanischer Belastung)

Nozzle: 0,4  mm

Schichthöhe: 0,15 mm

Spezifische Einstellungen:

renault zoe floor mats button repair top part clip.3mf: 100 % Füllung | Stützen: Überall

renault zoe floor mats button repair bottom part.3mf: 100 % Füllung

renault zoe floor mats button repair assembly tool.3mf: 30 % Füllung | 4 Wandstärken

Einbauanleitung

Vorbereitung: Schiebe das Unterteil mit der glatten Fläche (Druckbett-Seite) nach oben in das Loch des Teppichs. Positioniere es so, dass es mittig im Loch des Teppichs liegt.

Ansetzen: Setze das Oberteil mit dem geriffelten Zylinder nach unten im Loch des Unterteils an.

Montage: Drücke das Oberteil schnell und hart nach unten.

Hilfsmittel: Falls die Kraft der Finger nicht ausreicht, nutze das gedruckte Montagewerkzeug. Setze es auf den kleinen Knopf auf der Oberseite auf. Falls nötig, kannst du mit einem Hammer einen leichten Schlag auf das Werkzeug ausführen, um den Clip sicher einzurasten.

Support / Kaffeekasse

Die Entwicklung und das Testen solcher Ersatzteile erfordern Zeit und Filament für Prototypen. Wenn dir diese Reparatur geholfen hat und du meine Arbeit unterstützen möchtest, freue ich mich sehr über eine kleine Spende!

paypal.me/PatUnderlineS

Vielen Dank für deine Wertschätzung!

Urheberrecht & Nutzungsbedingungen

Diese Dateien werden unter einem strikten Copyright zur Verfügung gestellt. Mit dem Download akzeptierst du folgende Bedingungen:

Keine Weiterverbreitung: Die Dateien dürfen nicht auf anderen Plattformen hochgeladen oder auf anderem Wege an Dritte weitergegeben werden.

Keine kommerzielle Nutzung: Der Verkauf der digitalen Dateien sowie der Verkauf von physisch gedruckten Bauteilen ist untersagt.

Keine Veränderung (No Derivatives): Die Dateien dürfen nicht modifiziert oder als Grundlage für andere Designs verwendet werden.

Nur für den privaten Gebrauch durch den Endnutzer.

Für gewerbliche Nutzung nehmt bitte mit mir Kontakt auf.

Wenn euch das Modell gefällt wäre ein Like und ein Make nett. Danke dafür im Voraus. 
Für Verbesserungs- oder Änderungsvorschläge bin ich immer offen.

Tags