Laser Magnetic Hold Down Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by other creators, these bars are made roughly 12" long, 6" long, and 3" long.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 55
- Makes
- 1
- Views
- 182
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Inspired by other creators, these bars are made roughly 12" long, 6" long, and 3" long. These use N52 magnets that are 1/2" in diameter and 1/8" thick. I added curbed tabs on the ends to make them easy to lift up.
All files will need a pause added at layer 25. Once the print pauses, you will insert the magnets ensuring the same orientation for each one.
I'm including models that have words labeling the depth of the hold down on each side. These require a little more work in the slicer as you will need to slice the words separate from the clamp body and run the words as print, leave them on, then run the magnet body overtop the words.