Parametric Replacement feet for IKEA Havsta
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to raise my Havsta a little more than the default feet (spare part no. 153549).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Public Domain
I placed a Havsta cupboard near a ledge in my floor and needed to rise it by 11mm instead of the default ~5mm, in order to have enough clearance for the ledge. For this reason, the model includes a cutout to allow it to slide over the ledge without touching it.
This replacement foot fits perfectly into the two alignment bores (fit could be tighter, but I couldn't be bothered reprinting it).
I included the model as F3D and STEP files so you can adjust it to your needs.
Printing instructions
Print as oriented (z up) and enable support on build plate.
I printed it in PLA with 3 walls, layer height 0.3mm using a 0.6mm nozzle, 35% honeycomb infill for vertical strength and it supports the cupboard just fine.