Parametric Replacement feet for IKEA Havsta
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to raise my Havsta a little more than the default feet (spare part no. 153549).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Public Domain
I placed a Havsta cupboard near a ledge in my floor and needed to rise it by 11mm instead of the default ~5mm, in order to have enough clearance for the ledge. For this reason, the model includes a cutout to allow it to slide over the ledge without touching it.
This replacement foot fits perfectly into the two alignment bores (fit could be tighter, but I couldn't be bothered reprinting it).
I included the model as F3D and STEP files so you can adjust it to your needs.
Printing instructions
Print as oriented (z up) and enable support on build plate.
I printed it in PLA with 3 walls, layer height 0.3mm using a 0.6mm nozzle, 35% honeycomb infill for vertical strength and it supports the cupboard just fine.