SV08 SidePanel Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Hi Guys.
This is a printable frame to get more space between gantry and Original Panels.
In my case i used a 6mm Isolation foam. Covered under the steelcovers. Anyhow, this gives you more Space for even bigger Isolation on your panels.
Left and Right side are the same size, BackCover has a different size.
The cutout on the right side for the Cable is sill working and not blocked. Should be fine.
Printed in PETG High Flow mate from Sunlu.
If you have Questions, let me know.
I recommend highly to use grid as a top surface for the support structures. On my end, it was easy to remove, using a bedscraper.
Also you need to replace the Original Screws to 18mm ones.