NP CHUBE Air/Conduct Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very compact, local CPAP duct designed specifically for the CHUBE Air/Conduct and Beacon3d scanner.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This duct was designed with an intention to keep a low profile for non-planar ironing, without suffocating the airflow path.
With the moderate angle shape, any Beacon3d formfactor should have no issues settling in.
SLM shields are supported.
Direct Y-Offset= 27.70 mm
Variants:
Simple: allows one to accommodate the duct to their own toolhead
Direct: mount the duct directly to the shroud(ANNEALEAD PPS/PPA OR HIGHER END TG POLYMERS) expect to lose some material(~0.2mm) to burn in with testing done in ambient air
BOM:
CPAP hose: undersized hose ID leads to issues, best to avert that 19mm
Heat-sert: brass inserts are a common choice for reusable threads in polymers M3*5*4
Heli-coil: high temp polymer alternative due to heat-serts demanding heat soaking M3*2D
M3-drill: only for the chube direct versions, cut from the back side to gain access to the top mounting hole with a torx/hex key