NP CHUBE Air/Conduct Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very compact, local CPAP duct designed specifically for the CHUBE Air/Conduct and Beacon3d scanner.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This duct was designed with an intention to keep a low profile for non-planar ironing, without suffocating the airflow path.
With the moderate angle shape, any Beacon3d formfactor should have no issues settling in.
SLM shields are supported.
Direct Y-Offset= 27.70 mm
Variants:
Simple: allows one to accommodate the duct to their own toolhead
Direct: mount the duct directly to the shroud(ANNEALEAD PPS/PPA OR HIGHER END TG POLYMERS) expect to lose some material(~0.2mm) to burn in with testing done in ambient air
BOM:
CPAP hose: undersized hose ID leads to issues, best to avert that 19mm
Heat-sert: brass inserts are a common choice for reusable threads in polymers M3*5*4
Heli-coil: high temp polymer alternative due to heat-serts demanding heat soaking M3*2D
M3-drill: only for the chube direct versions, cut from the back side to gain access to the top mounting hole with a torx/hex key