Olympus C-5050 compact arca tripod plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile arca type tripod plate and bottom right strap connector for Olympus C-5050 Zoom
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About the design
This is a very compact arca-type tripod plate and bottom strap connector designed to fit the Olympus C-5050 zoom.
Note - I have an alternative version of this now, which is a bit thinner, has a bit wider base, and a more lozenge-y shape.
Printing it
I recommend slicing it top side down, with a lot of supports, since the steep angle on the left side will come out better that way - but with PLA it should be fine bottom side down too.
Attaching it
I've tested it with these screws: https://www.mcmaster.com/92220A181/
and there is an image attached with the specifications, since that's about as big as it can fit in terms of head width and height.
Just get a 1/4 20 screw that is about 1/4" long, with a head no wider than 0.375".
⚠ Disclaimer! Use at your own risk!
I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.