Through-door circular vent
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two piece circular through-door vent for most contemporary "paper" doors
- Rating
- 4.667 / 5
- Likes
- 27
- Downloads
- 236
- Makes
- 2
- Views
- 972
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
A simple two piece through-door vent for your bathroom or any other room that needs a bit of extra ventilation even when the door is closed.
When assembled properly the fins are oriented in such a way that one cannot see through the vent/door.
Drill a hole (or multiple holes) through the door of your choice with a 50mm (2 inch) hole saw then glue the two pieces in place. Since the cross section of the vent is relatively small, more than one is required if you have an active fan ventilation.
Slicer settings I have used:
0.2mm layer height
If you like the design please show it by clicking the like ♥ button. Thank you!
Happy 3D printing!